For the Cristex Thermal Products website please click here

Visit Site x

Show Menu

Our Products

Cristex supplies a comprehensive range of products manufactured from Glass Fibre (E.C.S. ECR), Carbon Fibre, Aramid Fibre, Dyneema®, Thermoplastic (nylon, polyester etc.) Epoxy Resins, and Natural Fibres.

< Back to Multiaxials

EPOXY RESIN

Our large range of Resin Systems include options for Wet Layup, (RTM) and Infusion. 

With the ability to combine Hardeners and Resins with varying curing times e.g. Slow Hardener with Infusion Resin it gives you the ability to vary within the Hardener family to reach the desired results.

Our Resins offer UV resistance and the low Mix Viscosity optimises Hand Lamination or Infusion. 

 All our Resin Systems have approved health and safety documentation.

Downloadable brochure from Cristex:

 RESINS

 
Wet-layup
Data Sheets
Resin /MSDS           
Hardener  
Mixing Ratio 
Pot-life (Room temp 25°C)                                                                 
Application Properties  
Tg°C           
MSDS              
  EC 130LV

W341 

100:30

8-15 min (100ml)

Short, medium, long pot-life, thermal resistance, high performance system

125

W341

 

EC152_W152.1HR

EC152_W152MR

EC152_W152MLR

EC152_W152LR

EC152_W152XLR

 

EC 152

W152HR

W152MR

W152MLR

W152LR

W152XLR

100:30

12-17 min (200ml)

35-45min (200ml)

95-115 min (200ml)

90-110 min (200ml)

100-120 min (200ml)

High performance resin with short, medium, long, extra-long pot-life hardeners for:

Small pieces wet-layup laminating at R.T

Medium and large surface vacuum bag  laminating

80

107

100

104

97

W152_HR 

W152_MR

W152_MLR

W152_LR

W152_XLR

EC147_W147 EC 147 W147  100:45 12-20 min (100ml)  Room temp fast curing system. Easy mixing ratio 2:1in volume  65   
 
RTM
Data Sheets                         
Resin /MSDS           
Hardener         
Mixing Ratio   
Pot-life (Room temp 25°C)                                                               
Application Properties 
Tg°C           
MSDS       

EC14_W152HR

EC14_W340

EC 14

W152HR

W340 

100:30  8-10 min  Room temp short or long pot-life system with high reactivity in hot press moulding 98 W152_HR

 

 

EC131LV_W342

EC 131LV

W341

W340

W342 

100:25

15-20 min (100ml)

65-75 min (100ml)

22-32 min (100ml) 

Systems with different reactivity for RTM process

90

94

90

W341

W340

W342

        

EC 157

W557  100:18 20-30 min (100ml) Systems with different reactivity for RTM process 100

W557

 
Infusion
Data Sheet
Resin /MSDS
Hardener
Mixing Ratio
Pot-life (Room temp 25°C)                       
Application Properties                                        
Tg°C     
MSDS

EC157_W152MR

EC157_W152MLR

EC157_W152XLR

EC 157

W152MR

W152MLR

W152XLR

100:30

40-50 min (200ml)

80-100 min (200ml)

120-125 min (100ml)

Very low viscosity and medium - long pot-life system.

Suitable for medium and large infusion component

102

90

90

W152_MR

W152_MLR

W152_XLR

 

HR: High reactive

MR: Moderatly reactive

MLR: Moderate to low reactive

LR: Low reactive

XLR: Extra low reactive

 

Multiaxial reinforcements are fabrics made up of multiple plies of parallel fibres, each laying in different orientation or axis – hence the term ‘multi-axial’. These layers are typically stitch bonded (usually with polyester thread) to form a fabric. Cristex can provide a range of Multiaxials in Glass, Carbon, and Aramid etc. in any of the following configurations. Additionally Quasi-isotropic fabrics are available on request.

To order any of the products please get in touch with your requirements.

Contact

With over 25 years of experience Cristex has a large knowledge base to help with a multitude of projects. For any technical advice please call our office.

Contact

Cristex has access to a large variety of both standard and unique products available to buy individually or by the pallet.

Contact

Get in touch

For information regarding the products and services that we offer, please don't hesitate to contact us