For the Cristex Thermal Products website please click here

Visit Site x

Show Menu

Our Products

Cristex supplies a comprehensive range of products manufactured from Glass Fibre (E.C.S. ECR), Carbon Fibre, Aramid Fibre, Dyneema®, Thermoplastic (nylon, polyester etc.) Epoxy Resins, and Natural Fibres.

< Back to Multiaxials


ADD-UP2 is the most recent addition to the Cristex range of Epoxy Resins, Hardeners, Adhesives and Additives which promotes adhesion between Gel and laminate. When using ADD-UP2 you do not need to abraid the surface or use a solvent wipe after the Gelcoat has fully cured. 

Designed to be used with Polyester & Vinylester Gelcoats when combined with our Elantas Resin Systems. ADD-UP2 becomes part of the Gelcoat and not a surface treatment. Additionally ADD-UP2 aids the curing process, it can also be used for Gelcoat repairs where sanding and polishing are required/necessary. 

The additive provides a speed up in curing time of the gelcoat, promoting a perfect adhesion of the Epoxy Resin applied and maintains a high gloss finish.

Lamination can start with the Gelcoat being at the tacky stage, around 1.5 hours after Gel application and up to 24 hours without any need for abrasion or solvent wipe. It is also suitable for Gelcoat repairs, Transparent /Coloured Gelcoats, sanding and it can be polished to a high gloss.

Water and chemical resistant. If you need any help with your project or need a sample please contact our office.



Compatible with all Polyester and Vinylester Gelcoats combined with our Elantas Resin System

Data Sheets
Flash Point   
Viscosity, dynamic  
ADD-UP2 99207-P0-AD-1 Liquid, opaque 32°C 0.86 g/ml at 25°C 10-20 mPa.s at 25°C

To be added to the gel coat/resin. It provides a speed up in the curing of gelcoat and promotes a perfect adhesion of the Epoxy Resin applied immediately after


Multiaxial reinforcements are fabrics made up of multiple plies of parallel fibres, each laying in different orientation or axis – hence the term ‘multi-axial’. These layers are typically stitch bonded (usually with polyester thread) to form a fabric. Cristex can provide a range of Multiaxials in Glass, Carbon, and Aramid etc. in any of the following configurations. Additionally Quasi-isotropic fabrics are available on request.

To order any of the products please get in touch with your requirements.


With over 25 years of experience Cristex has a large knowledge base to help with a multitude of projects. For any technical advice please call our office.


Cristex has access to a large variety of both standard and unique products available to buy individually or by the pallet.


Get in touch

For information regarding the products and services that we offer, please don't hesitate to contact us